The Replacement Back Drag for Western and Fisher XV V-Plow Snow Plows # 3371311215 bolts onto the holes in front of the cutting edge of your Fisher XV Snow Plows. Since it is a replacement blade, it is meant to fit on that specific kind of snow plow in front of its specific kind of cutting edge. That way you can take full advantage of its 70 degree angle for better scraping and back dragging.
This also comes in different sizes depending on your snow plow:
- Replacement Back Drag for Western/Fisher... view full answer...
You can turn the plow to an angle to either side so snow will move to one side or the other and not over the top. The Agri-Cover plows are built to be small, light-weight, easy to use plows. They do not use hydraulics and are shorter so they do not require their own set of head lights and can be used by lighter trucks and SUVs when compared with the larger, commercial plows used by snow removal companies.
I called Agri-Cover and you can remove one of the boxed ends to allow snow to escape... view full answer...
I did some research and I got the following information. You will have to be careful plowing wet and heavy snow with the Detail K2 Snowplow for 2" Hitches - 82" Wide x 19" Tall, part # K2AVAL8219. According to K2, "Your K2 snowplow is not intended to clear the snow deposits created by large municipal or commercial snowplows, which contain heavy compacted, frozen lumps of snow and ice, and could damage the plow and vehicle. view full answer...
Snow Bear states that to install the custom-fit mounting brackets # SB397-132 and the Winter Wolf plow # SB324-167, you will need to either remove or trim the front bumper fascia and air dam on your 2015 Ford F-150.
The Snow Bear custom-fit brackets will mount to already existing holes in your trucks frame. The bumper fascia could be trimmed or removed to allow access to the mounting brackets for the plow. Snow Bear stated that if you want to re-install the bumper fasica you will have... view full answer...
The SnowBear Winter Wolf Snowplow # SB324-166 that you referenced is an excellent option to replace your older SnowBear plow. It mounts to your 1997 Dodge Dakota using the mounting bracket kit # SB397-028 that you also referenced. The mounting bracket will need to replace what you currently have but everything would line up like what you have now.
I reached out to my contact at SnowBear and he said that they did update the structure of the plow to make it hold up better and the lifting... view full answer...
The Demco Classic Base Plate Kit # DM68FR you reference will fit your 2017 Ford F-250, however the snow plow brackets would likely get in the way, and would need to be removed.
Unfortunately, there is no adapter to make this work. However, I have attached some other components below you'll need for a complete flat towing setup:
-Tow bar # DM9511013
-Braking System # SM99243
-Wiring # RM-152-98146-7 view full answer...
You can use the EZ Connector Magnetic 14-Pin Trailer Connector # 319-S14-05-6 for your snow plow as long as you do not exceed the ratings. This has a maximum voltage of 36 volts, max current on any single conductor is 25 amps, and the max total combined current for all conductors is 100 amps. You will also need the # 319-S14-07-6 for the trailer end connector and the # 319-S7-61 if you need a mounting bracket. view full answer...
A trusted mechanic should be able to handle the installation for you. According to Curt, installation of their # C31012 front receiver should take around 45 minutes to an hour for an experienced installer. Once the receiver is installed, the plow will require assembly and electrical connections to the vehicle battery, and wiring the remote which should take a few hours. Any qualified mechanic should be able to complete the installation in around 3 or 4 hours.
I've linked you to the installation... view full answer...
We have the Firestone Coil-Rite kit part # F4160 as a fit for the front axle of your 2019 Ford F-350 which will work great to support the suspension due to the weight of your snow plow. Firestone is the industry leader for air bags because of how well they are made and how long they last. view full answer...
If you wanted to remove the yellow caps of the Replacement Snow Plow Guides # 3371308300, cut the guides shorter and then reinstall the yellow caps you certainly could. view full answer...
A heavy duty hand winch is what I'm assuming you are asking about like the Dutton-Lainson Hand Winch with TUFFPLATE Finish, Two Speed with Direct Drive - 3,200 lbs # DL15440 will have a maximum distance of 30 feet for a 3/8 inch cable. The rated capacity is based in direct pull on the third layer of line on the drum. Capacity is reduced as the line builds up on the drum. With wet snow, you really aren't going to get very far before you are at your max capacity especially when you have... view full answer...
The Bulldog ATV Snowplow Winch # BDW15021 can be mounted directly to the snowplow provided there is a suitable place to mount it. You can refer to the linked image that shows how this winch can be installed on a plow frame that has the necessary mounting point. view full answer...
According to the control box wiring diagram (see attached) 2 of the wires for the SnowBear Personal Snowplow for 2" Hitches # SB324-081 go to the electric winch and 2 of them go to the battery. The only other thing that you might have is a switch for light accessories but the black wires for that setup go to ground.
If none of this matches what you have then go ahead and send me a photo and/or a part number for the box you are looking at and I can see if there is anything else I can find out. view full answer...
I contacted DK2 and they were able to confirm that the Actuator Kit # K2ACT8020 will work to replace the winch on your Summit II Snow Plow. This kit comes with everything you need to install the actuator. view full answer...
We don't have a video that details how to replace the strap of your K2 Winch like part # K2RASP8219, but I did speak to my contact at K2 and he gave me a brief description of the process.
On the winch there is a u-bolt that needs to get removed after feeding the strap all the way out. He said this is pretty obvious and easy to do. Next, there is a pin holding the strap to the spool. On the side of the winch there are a couple of holes. You will need to line the pin up with one of the... view full answer...
In order to install the Off-Road Lighting Kit for SnowBear Snowplows part # SB324-127 on your SnowBear Hydraulic Snowplow you only need to use the lights and wiring. The mounting brackets are for the electric plows and will not be used for installation on the hydraulic plow.
For starters you will need to line up the two mounting holes on the light with the two mounting hole on either side of the crossbar used to secure the plow to the vehicle. You can then use the provided hardware to... view full answer...
In regards to driving with a snowplow like the Detail K2 Rampage II Elite Snowplow part # K2RAMP8219ELT which is a fit for a 2019 Ram 1500 Classic using the Custom Mounting Brackets for Detail K2 Snowplows part # K284314, you'll need to check with your local state offices for rules and regulations as they can be different for each state/county. The only issue I can see with this would be blocking the headlights and in which case you could just use the Halogen High/Low Beam Light Kit with... view full answer...
The Detail K2 Snowplow for 2" Hitches - 84" Wide x 22" Tall # K2AVAL8422 is designed to slide into the 2" receiver on the front of your 2011 Ford Ranger. This snow plow cannot be used with a receiver adapter so you definitely do not want to use one. If you are having difficulty reaching the receiver you will need to set the wheels to a higher position. The height of the wheels can be adjusted to match the height of your vehicle. view full answer...
The Replacement Electric Winch # K2EW8020 is meant to be a replacement for the winch that comes with the snow plows; Rampage K2RASP8219, Rampage II # K2RAMP8219, Storm K2STSP8422, Storm II # K2STOR8422, Summit K2SUSP8826, and Summit II K2SUMM8826.
The Control Box connects to the winch, the battery, and the control button that will be in the cab. This allows operation of the winch without having to get out of your vehicle.
There is an instruction manual for the snow plows that this winch... view full answer...
Go To Results